Mounting Brackets & Hardware

These Galvanized Toolbox Mounting Bracket easily mounts toolboxes on rollbacks or carriers. It is used for 20" or 24" deep underbody toolboxes on car carrier beds. Sold as a pair.

Note: Special Handling Fees Apply for Specific Items

Easily mount toolboxes on rollbacks or carriers. Used for 24" X 24" toolboxes on car carrier beds.

• 24"X24" or 24"X30"
• Pre drilled holes
• Sturdy steel angle iron
• Sold as each
  
  Available in the following sizes
  
  

  Item #	Size	Finish
  LR-2G	24" x 24"	Galvanized
  LR-5	24" x 24"	Powder Coated Black
  LR-5TG	24" X 30"	Tall Galvanized
  LR-5T	24" X 30"	Tall Powder Coated Black

Easily mount toolboxes on rollbacks or carriers. Used for underbody toolboxes on car carrier beds.

Available in the following sizes

Item #	Size	Finish
LR-6G	20" X 24"	Galvanized
LR-6	20" X 24"	Powder Coated Black
LR-6TG	24" x 24"	Tall Galvanized
LR-6T	24" x 24"	Tall Powder Coated Black

Note: Special Handling Fees Apply for Specific Items

Cut tool box installation time by more than half with this In The Ditch's Quick Mount. This Quick Mount has been the perfect choice for those who have one of the new low profile car carrier beds. In The Ditch made the mounting arms longer so you can drop the box down further to clear low profile beds. The Quick Mount has a unique low profile which will allow them to work with either inboard or outboard tilt cylinders. This Quick Mount is made from steel and come in a tuff coat black finish.

Recommend 2 mounts for 24" to 60" tool boxes and 3 mounts for 70" on up tool boxes

• The Ditch Tool Box Quick Mounts Only (Brackets sold separately)
• Works well with new Low Profile Car Carrier Beds
• Made from steel with a tuff coat black finish
• Sold as each (Not a pair)


Dimensions For Mounts:
• ITD-1581- Height: 14 9/16" Width: 7 1/8" Length: 27 3/4"
• ITD-1584- Height: 16 1/2" Width: 5 1/4" Length: 32 1/2"
• ITD-1588 and ITD-1588-GLV- Height: 18 1/2" Width: 5 1/4" Length: 32 1/2"
• ITD-1580 and ITD-1850-GLV- Height: 20 1/2" Width: 5 1/2" Length: 32 1/2"
Please see photos above for extra dimensions

Following Parts Sold Separately:

In In The Ditch Quick Mount Bracket - #ITD-6268
In The Ditch Mount Spacer (Only) - #ITD-6340

This is a special toolbox mount that is used when the toolbox needs to be slid forward to miss the leaf spring mounts. Still easily mount toolboxes on rollbacks or carriers. Used for 18" X 18" toolboxes. Sold as each.

Easily mount (2) toolboxes side by side (1) LR-1 and (1) LR-3. Used for underbody toolboxes on car carrier beds.

Toolbox mounting bracket for left side with integrated reservoir mount.

Toolbox mounting bracket for right side with integrated reservoir mount.

This Air Line and Wiring Bracket from In The Ditch connects to any tool box to provide a covered channel to run wires out of the tool box for lighting. An airline can also be run through the bracket to provide an easy to access airline connection.

Buyers Welded Black Structural Carbon Steel Toolbox Mount

Bolt or weld brackets in place.

One Pair of Heavy Duty Side-Mount Style Brackets for Phoenix ToolBox.

American Eagle 2" or 14" Riser Kit (2 per kit). The slotted mounting holes allow quick installation. They are used in Zip's road service bodies.

By using our Quick Hange Tab you will cut tool box installation time in half. With our Innovative Quick Hang Tab you won t have to use jacks any more. Just hang the mount on the frame rail and set the tool box on, it s that simple.

Having issues seeing inside your ITD toolbox? This In The Ditch LED Toolbox Light Kit is the perfect fit! Designed to make the users life easy! As soon as the toolbox door is opened, the 36” LED strip will light the entire box. Once you’re done you just shut the toolbox door and the timer will shut the light off (about 15 seconds), no more forgetting your toolbox lights on. This kit is so simple to install, there is no drilling or cutting required and its shipped out the ITD Air Fitting and Wire Routing Bracket so you have a nice clean finished look after you install. This LED Light Kit will light up any toolbox or dark space with 12-volt access.

Steel underslung toolbox brackets for STMRD/SUSD/ST3MRD. Available in two different options 24"Lx24"W OR 26"Lx26"W.

RC Industries easily mount toolboxes on rollbacks or carriers.

Super Duty Toolbox Bracket with Left and Right Pieces.

Phoenix Super Heavy Duty Toolbox L-Arm Mounting Brackets. These Brackets are Recommended for the STTB78 Toolbox.

Buyers Products Mounting Brackets for Polymer Truck Boxes are lightweight and corrosion-resistant. They are designed to securely hold your polymer underbody truck box. Formed from strong, C-channel A-36 steel, the angled, pre-drilled brackets are black powder-coated for an extra layer of protection from rust and the elements. They are designed for exact fit and built for long wear, keeping their shape with welded angle braces that can handle constant road vibration and impact without fail.

By using our Mount Spacer with our Mount Hang Tab (ITD-6268) you will cut tool box installation time in half. With our Innovative Quick Hang Tab you wont have to use jacks any more. Just hang the mount on the frame rail and set the tool box on, its that simple.

In The Ditch Power Lock Install Kit is used for the Powerlock Toolboxes. You will need (1) ITD-23467 kit Per truck build that will have the Powerlock Toolboxes on it. This one kit will control up to 12 boxes.

This is RC Industries Galvanized Mounting Brackets for RC toolboxes.

Super Duty Toolbox Bracket with Left and Right Pieces. These Brackets are Galvanized Steel and Powder Coated.

Phoenix Heavy Duty Toolbox Sandwich Brackets. For 33"L x 19"H Box.

Buyers Products Universal Truck Box Mounting Hardware is designed for use with Crossover, Saddle, and Gull Wing Truck Tool Boxes. This versatile hardware mounts to the bed rails of your pick-up. This high quality, industrial-grade 2-piece set consists of corrosion-resistant aluminum J-hooks and anti-rust 304-grade stainless steel washers and bolts. Mount your Truck Tool Box quickly and easily, and trust that your tools are secure for the long haul.

In The Ditch Powerlock Paddle Latch for customers using the In The Ditch Pro Series Toolboxes and want to convert them over to a Powerlock Toolbox. One kit per box.